![]() We propose some components that can be used with this derailleur like shifters, chain, cassette, chainrings and crankset. If the spokes are too close to the inside of the rear derailleur cage, turn the lower adjustment screw to adjust.Īccessories for this Shimano Dura ace derailleur: Turn the lower adjusting screw so that the guide roller moves below the largest gear. An overview of the significant changes made to the Shimano Dura Ace 9000 mechanical. Turn the upper adjusting screw until to adjust the guide roller will be below the outer line of the smallest sprocket when looking from the rear. Adjustment of the stops: 1/ Adjustement of the upper stop: If the chain is not properluy routed, the chain or the derailleur can be damaged. When routing the chain into the rear derailleur, pass it through the rear deailleur body from the side of the pin / plate to prevent the chain from derailing as shown in the diagram. The derailleur cage is equiped with a pin or plate to prevent the chain from derailing. Use an allen key with a torque of 8 to 10 N.m to screw the derailleur on the derailleur hanger. Assembly of this Shimano Dura ace derailleur: Compatibility of this Shimano Dura Ace derailleur:įor the best performance, the Shimano Dura Ace rear derailleur can be used with 9 gears shimano shifters, cassette, chain, chainrings and crankset. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |